TX-FM
- Renewable sensors for low-cost operations
- Intrinsically safe for use in areas of Class1, Division 2, Groups B,C and D, when used with a safety barrier
- IP 65 and NEMA 4X housing allows installation outdoors and in tough environments
- Two wire 24VDC powered
- Available with or without display
- 4 - 20 mA analog output
PureAire offers a simple, compact yet complete toxic gas monitoring system for chemical and petrochemical industries, with the TX-FM, FMD, and FN transmitter series.
These transmitters are CSA approved for intrinsic safety, for use in hazardous areas of Class 1, Division 2, Groups B, C & D, when connected with the intrinsically safe zener barrier. The sensor cell can be remote up to 10 feet from the transmitter for monitoring heavier-than-air gases, or for use in monitoring gas cabinets and fume hood exhaust ducts. The TX-FMD monitor can be connected to any PureAire controller, or standard PLC and SCADA control system.
The transmitter’s electronics are housed in polycarbonate NEMA 4X, IP 65 watertight, dust-tight, and corrosion-resistant housing. Designed for use in outdoor environments, PureAire toxic gas sensors, when used in combination with the TX-FMD, FM or FN transmitters, are gas-specific, stable and available for a wide range of gases.
The TX-FMD gas monitor has the lowest annual maintenance costs of any gas monitoring system on the market. PureAire’s Renewable sensor cells are easily recharged with electrolyte in the field at approximately 20% of the cost of disposable sensor cell type systems. Recharge costs typically run about $35 per sensor.
PureAire’s TX-FMD has been the standard for protecting workers in chemical companies, municipal waste treatment facilities, pharmaceutical plants and semiconductor wafer fabs.
Ammonia Sensor Provides Reliable Leak Detection down to –40C
A renewable electrochemical sensor for the detection and measurement of ammonia (NH3) is available from PureAire Monitoring Systems. Designed to respond quickly to potentially hazardous ammonia leaks and releases in refrigeration systems, fertilizer plants, chemical processing plants, and other facilities where ammonia is used or produced.
Chlorine Monitoring System Operates in 100% Condensing RH Environments
A sensitive and specific monitoring system for the detection and measurement of chlorine (Cl2) is now available from PureAire Monitoring Systems. Designed to respond quickly to chlorine gas even in 100% condensing RH environments, the PureAire Chlorine Monitor is ideal for outdoor and indoor applications as well as installation in wet scrubber systems and other processes. It is available in four different measurement ranges: 0 to 0.3 ppm, 0 to 1 ppm, 0 to 3 ppm, and 0 to 10 ppm.
Fenceline Monitor Detects Hydrogen Fluoride Releases
A sensitive and specific fenceline monitoring system for the detection and measurement of hydrogen fluoride (HF) is now available from PureAire Monitoring Systems. Designed to respond quickly and accurately to hydrogen fluoride leaks, the PureAire HF Monitor is ideal for perimeter monitoring and other outdoor applications where wide variations environmental conditions is common. The system is available with a measurement range of either 0 to 9 ppm.