The heart of the monitoring system is a long life pyrolizer designed to convert Methyl Bromide to an electrochemically active gas detected on PureAire’s renewable sensor cell. And the low cost renewable sensor cell offers the lowest annual preventative maintenance materials at about $75 per year for electrolyte replacement. The Air check Ex electronics, pyrolizer, sample pump and sensor cell are housed in a weather and explosion-proof enclosure suitable for installation in Class 1, Division 1, Group B, C, and D hazardous areas.
The instrument’s “smart” circuitry continuously monitors sensor cell status and sampling system performance. Continuous sensor cell operation is transmitted via 4-20 mA signal to PureAire controllers, PLC’s or remote alarm systems. Should a system error occur, the Air check Ex outputs a 2 mA signal to remote alarm/control systems to immediately alert control room personnel.
- Detects Methyl Bromide at Sub TLV Levels
- Enhanced Self-diagnostic Capability Decreases Downtime and Maintenance Costs
- Long Life Pyrolizer
- Dual Level User Selectable Alarm Relays
- Local Gas Concentration Digital Display
- 4-20 mA Analog Output
- Low Annual Operational Cost
- Low Cost Renewable Sensor Cell
Low Annual Operation Cost
The PureAire Air check Ex has the lowest annual maintenance costs of any gas monitoring system on the market. PureAire’s Renewable Sensor cells are easily recharged with electrolyte right in the field at approximately 20 % of the cost of disposable sensor cell type systems. Recharge costs typically run about $35.00 per sensor every 6 months. Combined with our built-in, low power pyrolizer, and long life sample pump, the Air check Ex will lower your annual operation costs. When compared to competitive gas monitors, it will pay for itself in just a few years.
Connects to DCS and PLC Controls
The Air check Ex Methyl Bromide Monitor is 24 V DC powered and transmits continuous gas concentration levels to any distributive control system, programmable logic controller or PureAire’s proprietary single and multichannel controllers. The Air check Ex Monitor can be operated remote up to 1,000 meters, 0.6 miles from centralized distributive control systems.
||Extractive Sample Draw
||Methyl Bromide (CH3Br)
||0 – 10 ppm
0 – 30 ppm
||-20 to +50 ºC
-4 to +122 ºF
||Multi Function Back-lit LCD Digital Display
Displays, Gas Name, ppm Concentration, AL1, AL2 & System Fault Messages
||Low Cost Renewable Electrochemical Sensor Cell
||Renewable 5 to 8 years
||4-20 mA Analog Output
Alarm Level 1 – SPDT AC 125 V, 0.3 A max
Alarm Level 2 – SPDT DC 30 V, 1.0 A max Resistive Load
Fault – SPDT Fail Safe
| Alarm Outputs
||3ea. Alarm Relays: Low and High Level Gas Alarm and System Fault
| Electrical Classification
||Explosion Proof Class 1, Div 1, Group B, C, & D
1 Other ranges available, consult factory.