- No calibration is required for oxygen
- Self-calibrating CO2 sensor
- Local backlit concentration display
- Built-in visual LED alarm indicators
- Alarm level 1 and 2 for O2 and CO2
- No drift due to environmental or temperature changes
- 3-year warranty
- No scheduled maintenance zirconium oxide O2 cell and long-life CO2 sensor
- Built-in flow sample pump for remote sampling up to 100 feet
- IP67 Water-Resistant Enclosure
- 4-20mA analog output (Active)
- Built-in user-adjustable alarms and relays
The PureAire Water-Resistant Combo O2/CO2 Monitor is a compact gas monitoring system that’s ideal for the continuous monitoring of both gases. The monitor is intended for use in nitrogen gas areas, or CO2 food and beverage, confined spaces, and other locations where low oxygen levels may pose a hazard to personnel.
The PureAire Water-Resistant Combo O2/CO2 is made with a proprietary zirconium cell and patented NDIR cell, rather than a continuously depleting electrochemical sensor cell. The zirconium cell means the monitor can provide stable oxygen and CO2 readings despite changes in temperature, barometric pressure, and humidity levels.
The PureAire Combo O2/CO2 oxygen sensor requires no quarterly calibration or annual maintenance and the CO2 sensor automatically adjusts to ambient levels. All you need to do is plug in the monitor and let it run in the background—no scheduled maintenance is required.
Connects to Distributive Control Systems and Programmable Logic Controllers
The Water-Resistant Combo O2/CO2 can be used with PureAire’s proprietary controllers, or a commonly paired accessory, the remote display. Individuals can operate the oxygen monitors remotely by as much as 3,000 feet from fire panels or programmable logic controllers.
No Calibration Required
The Water-Resistant Combo O2/CO2 Monitor does not require quarterly calibration, unlike other types of gas monitors. Since the earth is a natural source of calibrated oxygen, PureAire’s combo monitor is continuously being challenged to 20.9%. Additionally, the earth’s ambient levels of CO2 are 400 ppm. On a weekly basis or on demand, the monitor automatically adjusts to ambient CO2 levels. Enjoy a safer workplace with no calibration, and no expensive scheduled maintenance. A simple, periodic span adjustment may be necessary.
Plug & Play Operation
The Water-Resistant Combo O2/CO2 Monitor is ready to go right out of the box. To begin using the combo monitor, remove it from the box and place it on a surface or mount it on the wall using the included brackets. Then plug the monitor into your facility’s power supply or a wall socket. After a brief startup sequence, the monitor begins to operate.
The Water-Resistant Combo O2/CO2 Monitor is designed to provide unattended 24/7 leak detection for years. Supplied with a full bumper-to-bumper warranty, the Combo O2/CO2 will be the last gas monitor you’ll need to purchase.
O2 Monitor System Features
PureAire uses a sophisticated built-in CPU that provides a local display, safety alarms, and control for both oxygen and carbon dioxide simultaneously.
The Water-Resistant Combo O2/CO2 Monitor comes with individual dedicated user-selectable relays designed to operate on-off valves for the control of CO2 injection in grow rooms while simultaneously activating alarms when oxygen levels drop.