Tutorial Videos
PureAire Monitoring Systems: Accessing the Menu & Setting the Span Adjustment
This tutorial will provide step by step instructions on how to access the menu on your PureAire oxygen deficiency monitor. Once you have accessed the menu, you will learn how to adjust the span on the monitor. The span adjustment check should be done every 6-12 months, or anytime you feel is necessary.
PureAire Monitoring Systems: Connecting the Remote Display to the PureAire Oxygen Monitor
This tutorial will give step by step instructions on how to connect the remote display to a PureAire oxygen deficiency monitor.
PureAire Monitoring Systems: How to Recharge Sensor Cell
This tutorial will provide step by step instructions on how to recharge a sensor cell for the PureAire Monitoring Systems line of gas monitors. PureAire recommends that sensor cells be recharged every 6 months whether the cell is being used or sitting on a shelf.
PureAire Monitoring Systems: How to Connect the Horn & Strobe to a PureAire Oxygen Monitor
This tutorial will show you step by step how to connect the horn and strobe to a PureAire oxygen deficiency monitor.
PureAire Monitoring Systems: How to Connect a PureAire Oxygen Monitor to the 8 Channel Controller
This tutorial will provide step by step instructions on how to connect your PureAire oxygen deficiency monitor to the 8 channel controller.
PureAire Monitoring Systems: How to Change a Non-Resettable Fuse in a PureAire Oxygen Deficiency Monitor
This tutorial will show you step by step how to change a blown fuse in your PureAire Monitoring System's oxygen deficiency monitor.
*If your monitor came with a resettable fuse, you do not need to change the fuse. Simply turn the power off to the monitor in order to reset the fuse. When the power resumes, the fuse will reset.
PureAire Monitoring Systems: Using Span Gas to Test the Functionality of the Oxygen Monitor
This tutorial provides step by step instructions on how to verify that your PureAire oxygen monitor is reading the correct oxygen level. A cylinder of span gas will be necessary to preform this test. The span gas can be any non-depleting, inert gas. Verification of the oxygen monitor should be done every 6 months or anytime you want to verify the monitor for accuracy.