Calibration Kit v2
Oxygen Calibration Kit

Oxygen Calibration Kit

Product Summary

PureAire’s Oxygen Calibration Kit is for use with our complete line of Oxygen Deficiency Monitors. The Oxygen Calibration Kit includes all the necessary equipment to ensure your oxygen sensors perform at their best.  With a simple process, you can easily test the oxygen sensor and make any necessary adjustments based on its response to low oxygen levels.

PureAire’s Oxygen Sensors only require periodic testing with nitrogen to verify the cell’s response to low oxygen levels and, if needed, a slight annual adjustment of the sensor span to 20.9%.

To order, please contact a PureAire representative – 847-726-6000.

  • 8% Oxyen 103-liter disposable cylinder (94016)
  • 99% Nitrogen 103-liter disposable cylinder (94015)
  • 0.5 LPM C-10 Fixed Rate Regulator (94013) OR
  • C-10 Demand Flow Regulator (94014)
  • Tubing – 2ft
  • Calibration Cap
  • Durable Carrying Case (94012)

PureAire’s Oxygen Calibration Kit contains the equipment necessary for on-site calibration, including calibration gases, tubing, an oxygen calibration cap, and either a fixed-rate or demand flow regulator. Exposing the oxygen sensor to a known gas concentration ensures accurate measurement of oxygen levels. PureAire recommends verifying the sensor cell’s response to low oxygen levels annually and, if needed, slightly adjusting the sensor span to 20.9%.

Please Note: Items in the Oxygen Calibration Kit may be purchased separately.

Oxygen Calibration Kit

Oxygen Deficiency Monitor, 0-25% 

O2 Deficiency Monitor

 

Oxygen Deficiency Monitor – KF25, 0-25% 

 

Sample Draw Oxygen Deficiency Monitor, 0-25%

 

Please contact PureAire for a complete list of compatible monitors.